The average desk-based working day involves eight to ten hours of near-continuous sitting. Most people know this is a problem and do nothing about it — not because they lack motivation but because the practical options are either inconvenient, noisy, or require leaving the room entirely. The W-1 is a walking pad that sits permanently in your home office and runs quietly enough to use during a working session. You walk at a steady pace, your desk work continues, and you accumulate movement through the day without changing your routine around it.

This machine requires a dedicated floor space of 108cm × 52cm. It does not fold. It is designed to live in one place as a permanent part of your home office setup — not to be packed away between sessions.

The W-1 Performance Pillars

The W-1 motor runs at 2.5HP peak power and maintains consistent belt speed across its full 1–6km/h walking range, controlled entirely from a handheld remote so you never need to bend down or interrupt your work to adjust pace.

The speed range covers everything from a slow 1km/h stroll — suitable for reading or writing — up to a brisk 6km/h walking pace for more active sessions. The remote control handles all speed adjustments from your desk. One button increases pace, one decreases it. You do not need to step off the belt, crouch down to the control panel, or pause what you are doing on screen. For desk-based use this is the most practical control arrangement available — the machine responds to you, not the other way around.

The W-1 running belt is constructed in five layers — each layer serving a specific mechanical function that adds up to a walking surface that absorbs foot-strike impact and remains stable underfoot during extended sessions.

The five-layer construction works from the bottom up: a base layer for structural support, cushioning layers in the middle to absorb vertical impact from each step, and an anti-slip surface layer on top that keeps your foot planted through the full stride. The belt measures 39cm wide by 90cm long — wide enough for a natural walking gait without stepping to the edge, long enough for a full stride at any speed within the machine's range. Extended walking sessions — 30, 60, or 90 minutes — are what this belt is designed for.

The W-1 frame is built from alloy steel and supports a maximum user weight of 136kg, providing a stable platform that does not flex or shift during use even at the machine's higher walking speeds.

Frame rigidity matters more on a walking pad than on a conventional treadmill because the machine is lower to the ground and the user's weight is distributed differently. An alloy steel frame at this specification does not develop the lateral flex that cheaper frames exhibit after weeks of use. The machine weighs 17.39kg — substantial enough to stay planted on a hard floor surface during a session without requiring additional anchoring or a mat underneath.

The W-1 LED display shows five data points in real time — speed, time, steps, calories, and distance — and connects via Bluetooth to your phone for session tracking without any manual logging.

The display is positioned at the front edge of the machine, visible from a standing desk position without requiring you to look down sharply. Speed is shown in km/h. Time counts up from session start. Steps, distance, and a calorie estimate update continuously. The Bluetooth connection sends this data to a compatible fitness app on your phone — the machine has no speakers and does not play audio, the connection is data only. Setup takes under five minutes out of the box — unfold the display arm, plug in, set the machine on a flat hard surface, and it is ready to use.

Technical Specifications

• Motor: 2.5HP peak / 1800W

• Speed range: 1.0–6.0 km/h

• Weight capacity: 136kg

• Machine dimensions: 107.8 × 51.4 × 10.5cm

• Running belt: 39cm × 90cm, 5-layer anti-slip

• Machine weight: 17.39kg

• Frame material: Alloy steel

• Display: LED — speed, time, steps, calories, distance

• Remote control: Yes — included

• Bluetooth: Yes — data connection to phone app

• Slope: Fixed flat — not adjustable

• Heart rate monitor: No

• Folds for storage: No — permanent floor placement required

• Noise level: To be confirmed with supplier

• Certifications: To be confirmed with supplier

What's In The Box

• W-1 walking pad unit

• Remote control

• Power cable

• Instruction manual

Add the W-1 to Your Home Office

The W-1 pairs with The Zero-Equipment Athlete blueprint which covers daily movement strategies and how to build consistent walking habits into a full working day — available with your order.

Before You Use

Read the instruction manual fully before first use. Maximum user weight is 136kg — do not exceed this limit under any circumstances. Always wear appropriate footwear — do not use the machine in socks only. Begin at the lowest speed setting and increase gradually — do not start at a high speed from a standing position. Do not step onto or off the belt while it is moving — always bring the belt to a full stop first. Place the machine on a stable flat hard floor surface only — carpet that allows the machine to move during use is not suitable. Keep children and pets away from the belt during use. This machine has a maximum speed of 6km/h and is designed for walking pace only. Consult your doctor before beginning any new exercise programme, particularly if you have existing cardiovascular, joint, or musculoskeletal conditions.

Sourcing Transparency

The W-1 is sourced from a verified manufacturer and supplied in original manufacturer packaging. PeakFit independently selects products against our technical specification standards and provides support directly to every customer. Contact us at peakfitstore.com with any questions.